Summary
Plate Welder. Working in the heavy engineering sector for clients such as, Phillips 66, Tarmac, Vivergo, Ensus etc. Across various sectors such as chemical, oil and gas, cement and steel.
Wage
£14,918.80 a year
Training course
Plate welder (level 3)
Hours
Standard week is a 38 hour week. Under 18’s will only be allowed to work a 38 hour week. When 18 years old, it will be expected to work overtime, 12 hour shifts during shutdowns, weekends etc. when needed.
38 hours a week
Possible start date
Thursday 4 September
Duration
3 years
Positions available
2
Work
As an apprentice, you’ll work at a company and get hands-on experience. You’ll gain new skills and work alongside experienced staff.
What you’ll do at work
* Welding and repairing various metal materials
* Interpret drawings
* Examine welding techniques
Where you’ll work
Stanley House Falkland Way
Barton Upon Humber
DN18 5RL
Training
An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.
College or training organisation
HCF CATCH LIMITED
Your training course
Plate welder (level 3)
Equal to A level
Course contents
* Work safely at all times, comply with health, safety and environmental legislation, regulations and organisational requirements.
* Can obtain, check and use appropriate documentation (such as job instructions, drawings, quality control documentation).
* Plan and prepare welding activities before commencing the work.
* Obtain, position and assemble welding equipment and associated safety protection needed for activity.
* Prepare, check and protect materials and work areas ready for welding.
* Inspect assembly to be welded and undertake remedial work to comply with specification, or implement quality steps if rejected.
* Receive, inspect, condition and maintain consumables.
* Set, test and monitor key welding parameters as detailed within the Welding Procedure Specification.
* Deal promptly and effectively with problems within the limits of their responsibility using approved diagnostic methods and techniques and report those which cannot be resolved to the appropriate personnel.
* Use manual processes and equipment to remove material (powered and non‐powered).
* Achieves a quality of work to meet international standards e.g. ISO5817, ISO9606, ASME IX, AWS D1.1 for dimensional, surface inspection (e.g. Visual, Magnetic Particle, Dye Penetrant) and volumetric inspection (e.g. Radiography, Ultrasonic inspection).
* Complete progressive and final checks on the weld prior to release for formal inspection and report into the production control system at the appropriate stages of the work activity.
* Restore the work area on completion of the activity and where applicable return any resources and consumables to the appropriate location.
* Produce welds in plate and/or structural components using two welding processes from TIG, PAW, MMA, MIG/MAG, FCAW.
* Produce welds in plate and/or structural components using two materials from Carbon Steel, Low Alloy Steel, High Alloy Ferritic/Martensitic Steel, Austenitic Stainless Steel, Nickel & Nickel Alloys, Aluminium & Aluminium alloys, Titanium & Titanium Alloys, Copper & Copper Alloys.
* Produce welds in plate and/or structural components covering three plate welding positions which must include Vertical (either upward or downward progression) and overhead.
* Produce plate welds in 3 main joint configurations (Single or Double Sided Butt, Single or Double Sided T‐Butt & Fillet)
* Work safely at all times, comply with health, safety and environmental legislation, regulations and organisational requirements.
* Can obtain, check and use appropriate documentation (such as job instructions, drawings, quality control documentation).
* Plan and prepare welding activities before commencing the work.
* Obtain, position and assemble welding equipment and associated safety protection needed for activity.
* Prepare, check and protect materials and work areas ready for welding.
* Inspect assembly to be welded and undertake remedial work to comply with specification, or implement quality steps if rejected.
* Receive, inspect, condition and maintain consumables.
* Set, test and monitor key welding parameters as detailed within the Welding Procedure Specification.
* Deal promptly and effectively with problems within the limits of their responsibility using approved diagnostic methods and techniques and report those which cannot be resolved to the appropriate personnel.
* Use manual processes and equipment to remove material (powered and non‐powered).
* Achieves a quality of work to meet international standards e.g. ISO5817, ISO9606, ASME IX, AWS D1.1 for dimensional, surface inspection (e.g. Visual, Magnetic Particle, Dye Penetrant) and volumetric inspection (e.g. Radiography, Ultrasonic inspection).
* Complete progressive and final checks on the weld prior to release for formal inspection and report into the production control system at the appropriate stages of the work activity.
* Restore the work area on completion of the activity and where applicable return any resources and consumables to the appropriate location.
* Produce welds in plate and/or structural components using two welding processes from TIG, PAW, MMA, MIG/MAG, FCAW.
* Produce welds in plate and/or structural components using two materials from Carbon Steel, Low Alloy Steel, High Alloy Ferritic/Martensitic Steel, Austenitic Stainless Steel, Nickel & Nickel Alloys, Aluminium & Aluminium alloys, Titanium & Titanium Alloys, Copper & Copper Alloys.
* Produce welds in plate and/or structural components covering three plate welding positions which must include Vertical (either upward or downward progression) and overhead.
* Produce plate welds in 3 main joint configurations (Single or Double Sided Butt, Single or Double Sided T‐Butt & Fillet)
Your training plan
The apprenticeship follows a 3 year programme, with the first year spent off the job at CATCH in Stallingborough. This would be Monday - Friday, 8.00am - 4.00pm.
The remainder of the apprenticeship is then completed onsite with the employer.
Requirements
Essential qualifications
GCSE in:
* English Language and/or Literature (grade 4)
* Maths (grade 4)
Desirable qualifications
GCSE in:
* Science (grade 4)
Let the company know about other relevant qualifications and industry experience you have. They can adjust the apprenticeship to reflect what you already know.
Skills
* Keen interest
* Hardworking
* Communication
Other requirements
Needs to be at least 17 by the time they would come to us in their 2nd year. Ideally already have a driving license / working towards driving as will need own transport to get to sites as required.