Social network you want to login/join with:
Welder at Fablink Tank Systems, based in Bishop Auckland, Northampton
Client:
Fablink Group Holdings
Location:
Northampton, United Kingdom
Job Category:
Other
EU work permit required:
Yes
Job Reference:
8a33a737b013
Job Views:
93
Posted:
11.03.2025
Expiry Date:
25.04.2025
Job Description:
Salary: Starting rate £11.75 - £13.00 per hour (depending on experience)
Job Purpose: Responsible for welding components in the required quantities which conform to the company’s quality standards under ISO 9001:2015.
Reports to: Supervisor
Key Areas of Job:
1. Working safely to obtain the appropriate jigs and tools from their respective locations arranging these jigs/tools to produce the required component.
2. For all categories of components work using SOPs to produce components correct to customer specifications.
3. This may involve:
- Tacking of the components
- Finish welding of tacked components or
- Both tacking and finishing welding of the same components.
4. To produce the required batch of components, ensuring that all the components within the batch comply in all respects with the customer specifications and quality standards.
5. On completion of the required batch, to return the jigs/tools to their storage areas and also remove the finished components to the allocated work in progress area.
6. To ensure that the welding machines are operated using safe working practices.
7. To ensure that the welding machines are set to the optimum parameters for the required joint configuration.
8. To ensure that at all times the working areas are kept tidy.
9. To work safely and follow all company safety procedures.
10. Contribute to Continuous Improvement initiative.
11. In the event that there is a problem producing a satisfactory component that meets customer specifications during production both dimensionally and in appearance then contact must be made with the appropriate Team Leader and/or a Quality Leader as per instructions.
12. To operate the overhead crane to transport materials, jigs, components, etc.
13. To undertake any other duties which the company may require as and when necessary.
Key Post Holder Requirements:
Essential:
Must be available to work on a variety of shifts in line with business demands.
* Must have own transport - due to location and shift working requirement.
* Must be experienced and competent in steel fabrication.
* 1 year experience of welded component manufacture.
* Qualified to BS EN ISO 9606-1.
* Knowledge of production machinery grinders, presses, lifting equipment.
* Successfully completed a welding apprenticeship or equivalent in welding.
Shifts:
Early Shift: 6am-2pm Mon to Thurs & 6am-1pm Fri
Back Shift: 2pm-12am Mon to Thurs (Fridays off)
Night Shift: 10.30pm - 6am Sunday and 10.00pm - 6am Mon to Fri
Job Type: Full-time
Benefits:
* Company pension
* Cycle to work scheme
* Life insurance
* On-site parking
* Referral programme
* 8 hour shift
* Monday to Friday
* Night shift
* Overtime
* Weekend availability
Ability to commute/relocate:
Bishop Auckland: reliably commute or plan to relocate before starting work (required)
Experience:
MIG welding: 1 year (required)
Fabrication: 1 year (preferred)
Please do not contact us if you are a recruitment agency as we have a preferred suppliers list which we use once direct applications have been received.
#J-18808-Ljbffr