Summary
The successful candidate will be required to carry out metal fabrication, welding and machining services that support the overall site planned maintenance strategy, including identified repairs and upgrades to production plant, equipment and buildings. To ensure safety and reliability of the production process and equipment is maintained.
Wage
£15,704 for your first year, then could increase depending on your age
National Minimum Wage rate for apprentices
Training course
Metal fabricator (level 3)
Hours
You will work Monday to Friday. Your start and finish times including your shift pattern will be determined by the employing company.
40 hours a week
Start date
Monday 8 September 2025
Duration
3 years 3 months
Positions available
1
Work
Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.
What you’ll do at work
Role & responsibilities:
* Continuous development of knowledge and familiarity with the engineering requirements of the bakery process systems and machinery
* To work as an active part of a skilled cross functional planned maintenance team
* To ensure correct Health & Safety, Food Safety and Hygiene standards are adhered to at all times
* To actively participate in a Continuous Improvement culture throughout the site, constantly identifying opportunities to improve efficiencies and reduce waste. Participating and fully supporting the site Operating Brilliance Process (OBP) and contributing to cross functional objectives if required
* To ensure planned maintenance work is completed to strict schedules, and constantly look for improvements that will ensure reliability of equipment is improved
* To ensure good working practices are adhered to throughout
* To work on various projects including installation and modifications to plants and equipment
* To ensure working area and associated equipment is always maintained to good safe standard
* To ensure equipment within work area of responsibility is inspected and examined as required for safety reasons
* All work to be documented on the CMMS and completed within the set timescale
* To attend the engineering daily review meeting when required
* To work alongside and support the BI team/projects team when required to meet the business’ objectives
* This job description is not an exhaustive list of tasks performed and may be required to perform duties of a similar nature from time to time
Where you’ll work
Claywheels Lane
Sheffield
S6 1LY
Training
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
College or training organisation
THE UNIVERSITY OF SHEFFIELD
Your training course
Metal fabricator (level 3)
Equal to A level
Course contents
* Work safely at all times, comply with health & safety legislation, regulations and organisational requirements.
* Comply with environmental legislation, regulations and organisational requirements.
* Obtain, check and use the appropriate documentation (such as job instructions, drawings, quality control documentation).
* Carry out relevant planning and preparation activities before commencing work activity.
* Undertake the work activity using the correct processes, procedures and equipment.
* Carry out the required checks (such as quality, compliance or testing) using the correct procedures, processes and/or equipment.
* Deal promptly and effectively with problems within the limits of their responsibility using approved diagnostic methods and techniques and report those which cannot be resolved to the appropriate personnel.
* Complete any required documentation using the defined recording systems at the appropriate stages of the work activity.
* Restore the work area on completion of the activity and where applicable return any resources and consumables to the appropriate location.
* Identify and follow correct Metal work instructions, specifications, drawing etc.
* Mark out using appropriate tools and techniques.
* Cut and form Metal for the production or maintenance of fabricated products.
* Produce and assemble Metal products to required specification and quality requirements.
* Identify and follow correct joining instructions, specifications, drawing etc.
* Carry out the relevant preparation before starting the joining fabrication activity.
* Set up, check, adjust and use joining and related equipment.
* Weld joints in accordance with approved welding procedures and quality requirements.
* Work safely at all times, comply with health & safety legislation, regulations and organisational requirements.
* Comply with environmental legislation, regulations and organisational requirements.
* Obtain, check and use the appropriate documentation (such as job instructions, drawings, quality control documentation).
* Carry out relevant planning and preparation activities before commencing work activity.
* Undertake the work activity using the correct processes, procedures and equipment.
* Carry out the required checks (such as quality, compliance or testing) using the correct procedures, processes and/or equipment.
* Deal promptly and effectively with problems within the limits of their responsibility using approved diagnostic methods and techniques and report those which cannot be resolved to the appropriate personnel.
* Complete any required documentation using the defined recording systems at the appropriate stages of the work activity.
* Restore the work area on completion of the activity and where applicable return any resources and consumables to the appropriate location.
* Identify and follow correct Metal work instructions, specifications, drawing etc.
* Mark out using appropriate tools and techniques.
* Cut and form Metal for the production or maintenance of fabricated products.
* Produce and assemble Metal products to required specification and quality requirements.
* Identify and follow correct joining instructions, specifications, drawing etc.
* Carry out the relevant preparation before starting the joining fabrication activity.
* Set up, check, adjust and use joining and related equipment.
* Weld joints in accordance with approved welding procedures and quality requirements.
Your training plan
You will study on a Level 3 Metal Fabricator apprenticeship. On completion of this, you will gain a qualification in Engineering at Level 3 standard.
During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis. After this, you will attend the training centre for one day a week for knowledge study.
Requirements
Essential qualifications
GCSE or equivalent in:
* English Language (grade Grade C or 4)
* Mathematics (grade Grade C or 4)
Let the company know about other relevant qualifications and industry experience you have. They can adjust the apprenticeship to reflect what you already know.
Skills
* Communication skills
* Attention to detail
* Organisation skills
* Analytical skills
* Logical
* Team working
* Initiative
* Patience