Summary
Bifrangi UK Limited are looking for a CNC Turner Apprentice to complete a Level 3 Machinist apprenticeship and join their team. You will gain experience working on CNC lathes (Siemens & Fanuc operating systems), plus more.
Wage
£17,374.24 a year
Training course
Machining technician (level 3)
Hours
You will work Monday to Friday. Your start and finish times including your shift pattern will be determined by the employing company.
37 hours 30 minutes a week
Possible start date
Monday 8 September
Duration
3 years 3 months
Positions available
1
Work
As an apprentice, you’ll work at a company and get hands-on experience. You’ll gain new skills and work alongside experienced staff.
What you’ll do at work
The successful candidate will receive training in:
* Knowledge of Health and Safety requirements including correct use of PPE, workspace cleanliness, COSHH
* A complete understanding of CNC turning and the relevant programming languages
* The candidate will operate CNC lathes and machining centres manufacturing parts to satisfy existing orders and helping to develop prototype parts for potential new business
* Experience working on CNC lathes (Siemens & Fanuc operating systems)
* Programming experience varying in complexity
* Verify conformity of parts using gauges - sending first off parts for CMM measurement along with an understanding of measurement reports
* Work with Technical/Quality engineers to improve the processes and working environment
* Ability to understand operation and method sheets
* Working with Standard Operating Procedures
* Understand engineering drawings (geometric tolerancing)
* Experience working in an engineering environment
* Ability to work under pressure
Where you’ll work
Grange Mill Lane
Sheffield
S9 1HW
Training
An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.
College or training organisation
THE UNIVERSITY OF SHEFFIELD
Your training course
Machining technician (level 3)
Equal to A level
Course contents
* Comply with statutory health and safety regulations and procedures.
* Comply with environmental, ethical and sustainability regulations and procedures: safe disposal of waste, re-cycling or re-use of materials and efficient use of resources.
* Prepare and set up conventional or CNC machines.
* Operate and adjust conventional or CNC machines.
* Apply risk assessment and hazard identification processes and procedures in the work area.
* Monitor, obtain and check stock and supplies, and complete stock returns.
* Record information - paper based or electronic. For example, energy usage, job sheets, risk assessments, equipment service records, test results, handover documents and manufacturers' documentation, asset management records, work sheets, checklists, waste environmental records and any legal reporting requirements.
* Read and interpret information. For example, data and documentation used to produce machined components.
* Apply engineering, mathematical and scientific principles.
* Plan and organise own work and resources.
* Follow and apply inspection, quality assurance procedures and processes.
* Select machining process.
* Select and setup tooling and work holding devices.
* Set and adjust machine operating parameters. For example, setting feeds and speeds for roughing and finishing operations, loading, proving and validating programs when using a CNC machine tool.
* Apply machining operations and techniques to produce complex components with features. For example, parallel; stepped; angular diameters and faces; grooves; slots; recesses and undercuts; radii and chamfers; internal and external forms and profiles; reamed; bored; drilled and electro eroded holes; internal and external screw threads.
* Measure and check components.
* Select and check condition of tools and equipment. Identify issues, resolve and take action as needed.
* Identify and action issues in the manufacturing process.
* Apply fault-finding and diagnostic testing procedures to identify faults. Diagnose and resolve issues. Escalate issues.
* Maintain the work area and return any resources and consumables.
* Communicate with others verbally. For example, colleagues and stakeholders.
* Follow machine shut down, safe isolation, handover, start up or warm up procedures. Escalate issues.
* Apply continuous improvement techniques. Devise suggestions for improvement.
* Apply ethical principles.
* Apply team working principles.
* Comply with statutory health and safety regulations and procedures.
* Comply with environmental, ethical and sustainability regulations and procedures: safe disposal of waste, re-cycling or re-use of materials and efficient use of resources.
* Prepare and set up conventional or CNC machines.
* Operate and adjust conventional or CNC machines.
* Apply risk assessment and hazard identification processes and procedures in the work area.
* Monitor, obtain and check stock and supplies, and complete stock returns.
* Record information - paper based or electronic. For example, energy usage, job sheets, risk assessments, equipment service records, test results, handover documents and manufacturers' documentation, asset management records, work sheets, checklists, waste environmental records and any legal reporting requirements.
* Read and interpret information. For example, data and documentation used to produce machined components.
* Apply engineering, mathematical and scientific principles.
* Plan and organise own work and resources.
* Follow and apply inspection, quality assurance procedures and processes.
* Select machining process.
* Select and setup tooling and work holding devices.
* Set and adjust machine operating parameters. For example, setting feeds and speeds for roughing and finishing operations, loading, proving and validating programs when using a CNC machine tool.
* Apply machining operations and techniques to produce complex components with features. For example, parallel; stepped; angular diameters and faces; grooves; slots; recesses and undercuts; radii and chamfers; internal and external forms and profiles; reamed; bored; drilled and electro eroded holes; internal and external screw threads.
* Measure and check components.
* Select and check condition of tools and equipment. Identify issues, resolve and take action as needed.
* Identify and action issues in the manufacturing process.
* Apply fault-finding and diagnostic testing procedures to identify faults. Diagnose and resolve issues. Escalate issues.
* Maintain the work area and return any resources and consumables.
* Communicate with others verbally. For example, colleagues and stakeholders.
* Follow machine shut down, safe isolation, handover, start up or warm up procedures. Escalate issues.
* Apply continuous improvement techniques. Devise suggestions for improvement.
* Apply ethical principles.
* Apply team working principles.
Your training plan
You will study on a Level 3 Machining Technician pathway. On completion of this, you will gain a qualification in Engineering at Level 3 standard.
During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis. After this, you will attend the Training Centre for one day a week for knowledge study.
Requirements
Essential qualifications
GCSE in:
* English Language (grade 4)
* Mathematics (grade 4)
Let the company know about other relevant qualifications and industry experience you have. They can adjust the apprenticeship to reflect what you already know.
Skills
* Communication skills
* Attention to detail
* Organisation skills
* Problem solving skills
* Analytical skills