Summary
During this apprenticeship you will report to the Jackson's London Office. This opportunity will provide excellent training in mechanical, electrical, electronic and hydraulic engineering relating to the service, repair, modernisation and installation of a wide range of lift-associated equipment. This is a fantastic opportunity.
Wage
£15,704 for your first year, then could increase depending on your age
National Minimum Wage rate for apprentices
Training course
Lift and escalator engineering (level 3)
Hours
Monday - Friday between 8.00am - 5.00pm.
40 hours a week
Start date
Sunday 1 June 2025
Duration
3 years 6 months
Positions available
1
Work
Most of your apprenticeship is spent working. You’ll learn on the job by getting hands-on experience.
What you’ll do at work
Duties will include:
* Working alongside experienced lift engineers
* Application of the use of tools
* Risk assessing safety critical environments
* Carrying out the servicing of lift equipment
* Investigating lift breakdowns
* Replacing worn / damaged equipment
* Modernising existing lift equipment
Where you’ll work
Farnborough Library
Pinehurst Avenue
Farnborough
GU14 7JZ
Training
Apprenticeships include time away from working for specialist training. You’ll study to gain professional knowledge and skills.
College or training organisation
L.I.T.S. LIMITED
Your training course
Lift and escalator engineering (level 3)
Equal to A level
Course contents
* Comply with health and safety regulations, standards and industry guidance, for example method statements and risk assessments.
* Comply with environmental and sustainability regulations and organisational procedures for example, segregate resources for reuse, recycling, and disposal.
* Use tools, alignment equipment and measuring devices, completing calibration checks where required.
* Lift and handle systems and components using mechanical or manual methods.
* Apply principle and techniques to access digital and analogue control and drive systems.
* Fault find and diagnose issues using electrical measuring equipment such as multi-meters and electronic diagnostic tools.
* Interpret and use engineering documentation such as electrical wiring diagrams, mechanical drawings, assembly drawings, construction drawings and general arrangement drawings.
* Identify, organise, and use resources to complete tasks, with consideration for cost, quality, safety, security, and environmental impact.
* Communicate with others verbally for example, colleagues and stakeholders.
* Comply with information contained in site notices and instructions.
* Prepare, maintain and restore the work area on completion of the activity.
* Record and enter information - paper based or electronic. For example, job sheets, risk assessments, equipment maintenance records, test results, handover documents, on-site checklists, waste environmental records and any legal reporting requirements.
* Follow equity, diversity, and inclusion procedures.
* Apply team working principles.
* Apply continuous improvement techniques. Devise suggestions for improvement.
* Carry out and record planned and unplanned learning and development activities.
* Option 1. Apply the required procedures when working in a traction lift environment.
* Option 1. Apply techniques and principles of measuring and setting out lift equipment.
* Option 1. carry out installation of lift suspension systems.
* Option 1. Carry out installation of lift machines, overspeed protection devices and control systems.
* Option 1.Carry out installation of lift doors, entrances, and associated equipment.
* Option 1. Appy procedures to put the lift into service and confirm correct operation associated with lift systems.
* Option 1. Comply with procedures to access and egress to lift pit and top of car spaces.
* Option 1. Apply procedures to take the lift out of service in preparation for access.
* Option 2. Apply the required procedures when working in an escalator or moving walk environment.
* Option 2. Carry out installation of escalator and moving walk equipment for example truss, steps, pallets, handrail, chains, step band and safety sensors.
* Option 2. Apply techniques and principles of measuring and setting out escalator or moving walk equipment.
* Option 2. Appy procedures to put the escalator or moving walk into service and confirm correct operation associated with escalator or moving walk systems.
* Option 2. Apply procedures to take the escalator or moving walk out of service in preparation for access.
* Option 2. Comply with procedures to access and egress escalator or moving walks bottom return spaces.
* Option 3. Apply the required procedures when working in a traction lift environment.
* Option 3. Check lift positioning systems are working to specification.
* Option 3. Check, replace and setup lift door systems and clearances and check door closing protection.
* Option 3. Check lift travel requirements such as the correct set up of lift travel over-runs.
* Option 3. Inspect and verify the compliance of suspension systems. Determine when replacement is necessary.
* Option 3. Conduct planned and reactive lift maintenance.
* Option 3. Apply procedures to take the lift out of service in preparation for access.
* Option 3. Appy procedures to put the lift into service and confirm correct operation associated with lift systems.
* Option 3. Comply with procedures to access and egress lift pit and top of car spaces.
* Option 4. Apply the required procedures when working in an escalator or moving walk environment.
* Option 4. Carry out removal and replacement of escalator or moving walk parts for example steps, pallets, chains, handrails and adjust for optimal performance.
* Option 4. Check and set up safety systems for example comb plates, handrail entry devices, step sag switches, step and pallet sensors and handrail sensors, ensuring they operate to specification.
* Option 4. Check, adjust and repair tensioning systems for example handrail tension, main drive chain tension, step chain tension. Split, remove and replace chains.
* Option 4. Conduct planned and reactive escalator or moving walk maintenance.
* Option 4. Apply procedures to take the escalator or moving walk out of service in preparation for access.
* Option 4. Comply with procedures to access and egress escalator or moving walks bottom return spaces.
* Option 4. Appy procedures to put the escalator or moving walk into service and confirm correct operation associated with escalator or moving walk systems.
* Comply with health and safety regulations, standards and industry guidance, for example method statements and risk assessments.
* Comply with environmental and sustainability regulations and organisational procedures for example, segregate resources for reuse, recycling, and disposal.
* Use tools, alignment equipment and measuring devices, completing calibration checks where required.
* Lift and handle systems and components using mechanical or manual methods.
* Apply principle and techniques to access digital and analogue control and drive systems.
* Fault find and diagnose issues using electrical measuring equipment such as multi-meters and electronic diagnostic tools.
* Interpret and use engineering documentation such as electrical wiring diagrams, mechanical drawings, assembly drawings, construction drawings and general arrangement drawings.
* Identify, organise, and use resources to complete tasks, with consideration for cost, quality, safety, security, and environmental impact.
* Communicate with others verbally for example, colleagues and stakeholders.
* Comply with information contained in site notices and instructions.
* Prepare, maintain and restore the work area on completion of the activity.
* Record and enter information - paper based or electronic. For example, job sheets, risk assessments, equipment maintenance records, test results, handover documents, on-site checklists, waste environmental records and any legal reporting requirements.
* Follow equity, diversity, and inclusion procedures.
* Apply team working principles.
* Apply continuous improvement techniques. Devise suggestions for improvement.
* Carry out and record planned and unplanned learning and development activities.
Your training plan
Full training and support will be given via work-based learning. The successful applicant will be expected to achieve the following:
* Level 3 NVQ in Engineering Maintenance - Lift or Escalator Service and Repair
* Lift and Escalator Industry Association distance learning units
Requirements
Essential qualifications
GCSE or equivalent in:
* English (grade A* -C (4-9))
* Maths (grade A* -C (4-9))
BTEC or equivalent in:
* Engineering (grade Pass)
Desirable qualifications
GCSE or equivalent in:
* Science (grade 9-4 (A*-C))
Let the company know about other relevant qualifications and industry experience you have. They can adjust the apprenticeship to reflect what you already know.
Skills
* Communication skills
* Problem solving skills
* Team working
* Initiative
* Physical fitness
Other requirements
Apprentices are paid for their normal working hours and training that's part of their apprenticeship (usually one day a week)