Description: Strip and Fit/Mechanical department are responsible for the stripping out and re-fitting of all parts required to carry out repairs to damaged vehicles. All stripping must be carried out as per job card, or other instruction from the Workshop Controller. A high standard must be achieved at all times. Liaising with other members of staff is essential in this role to help the throughput of work Responsibilities:
* Stripping vehicle for repair
* Stripping vehicles as per job card
* Checking new parts list whilst stripping
* Reading methods when unsure of the correct procedure
* Reporting extra parts needed to Workshop Controller/Estimator
* Complete check sheet at each stage
* Air-con re-gas (trained persons only)
* Geometry (trained persons only)
* Light alignment
* Fitting vehicles after repair
* Checking locks, lights, electrics as per quality check sheet
* Report to Workshop Controller if warning lights on
* Cleaning up work/storage area, and making sure that plant and equipment is working correctly, any faults found, immediately inform management of findings
* Liaising with other departments
* Report any problems to Workshop Controller
#J-18808-Ljbffr