Description: Strip and Fit/Mechanical department are responsible for the stripping out and re-fitting of all parts required to carry out repairs to damaged vehicles. All stripping must be carried out as per job card, or other instruction from the Workshop Controller. A high standard must be achieved at all times. Liaising with other members of staff is essential in this role to help the throughput of work.
Responsibilities:
1. Stripping vehicle for repair
2. Stripping vehicles as per job card
3. Checking new parts list whilst stripping
4. Reading methods when unsure of the correct procedure
5. Reporting extra parts needed to Workshop Controller/Estimator
6. Complete check sheet at each stage
7. Air-con re-gas (trained persons only)
8. Geometry (trained persons only)
9. Light alignment
10. Fitting vehicles after repair
11. Checking locks, lights, electrics as per quality check sheet
12. Report to Workshop Controller if warning lights on
13. Cleaning up work/storage area, and making sure that plant and equipment is working correctly; any faults found must be immediately reported to management.
14. Liaising with other departments
15. Report any problems to Workshop Controller
#J-18808-Ljbffr