Major Recruitment are currently looking for Steel Operative / Overhead Crane Operator in the Oldbury area.
Rotating shift patterns:
* £12.58 6am till 2pm and 2pm till 10pm
* £13.58ph 10pm till 6am
Overtime:
* First 2 hours overtime on weekdays = £15.48ph
* Anything from 2 hours to 4 hours overtime on weekdays = £17.37ph
* First 4 hours on a Saturday = £17.37ph
* Anything over 4 hours on a Saturday = £23.16ph
Location: Oldbury B69
Duties and Responsibilities:
* This is the start of the manufacturing process.
* Using an overhead crane to load steel coils onto a mandrel and feed it into the rolling mill - Crane certification required; in-house course will be undertaken.
* When the coil comes to an end, load another onto the mandrel and spot weld them together; this process continues throughout.
* Recording of coils that are loaded and consumed throughout the shop floor computer system.
* Operate Uncoiler, Flattener, Shear Welder, and Accumulator.
* Load steel coil into uncoiler, sheer/weld new coil to previous one, and keep line moving.
* Alert to quality issues.
* Use of a Micrometre and Vernier to check the size, thickness, and quality of the product.
* Check the length corresponds with the job card and record and book finished products on the shop floor computer system.
* Banding machine to then band the tube at the end of the process.
* Read and correctly use a measuring tape, micrometer, and caliper.
Skills and Experience required:
* 1-2 years industrial manufacturing experience.
* Welding experience.
* Mechanically inclined.
* Effective communication: reading, speaking, writing in English.
* Physically able to stand and walk for long periods of time, perform repetitive lifting of 30lbs-50lbs, overhead reaching, bending, kneeling, crouching, pushing, pulling.
INDLS
#J-18808-Ljbffr