OT Cyber Engineer
Warwick – Hybrid
6 month contract
Overview
As a Controls & Instrumentation Project Engineer you will be responsible for developing systems and preparing control and instrument deliverables based on process specifications across the full project and product life-cycle. This Includes the development of designs and schematics, selection of components, development of all software aspects of the systems, selection of instrumentation, sub-contract support and installation and commissioning of control system upgrades and software updates.
You will create detailed specifications, instrument lists, IO schedules, cable schedules, cable block diagrams, termination drawings, hook-up drawings, layout drawings and test procedures.
You will be highly motivated, able to work independently, and have demonstrable leadership qualities. You will be confident in your own ability to deliver the project on time and within budget. You will be an experienced C&I engineer who can identify with the majority of the following criteria.
* Good knowledge of the C&I related British and international standards;
* Full C&I project life cycle experience;
* Experience in preparation, or reviewing full C&I project documentation including functional specifications, wiring/loop diagrams, P&IDs and test procedures;
* An understanding of programmable logic controllers (PLC) including both hardware and software;
* An understanding of industrial communication networks and its protocols including Profibus, Profinet, Modbus TCP
* The ability to specify, install and commission instrumentation;
* A knowledge of ATEX - Ex instrumentation, devices, and its installation requirements;
* The ability to produce technical reports, and able to clearly explain complex technical C&I related issues;
* The ability to push and justify the design changes to meet good practice and client requirements;
* The ability and willingness to travel worldwide to participate in meetings, completing factory acceptance tests (FAT) with vendors, site acceptance tests (SAT), and conduct inspections/audits;
* Monitoring of all on-site activities including installation, commissioning, and site acceptance testing (SAT)
* Mentoring and support less experienced engineers
* The ability to innovate, think laterally and implement processes
* The ability to communicate clearly and engage with fellow professionals as part of a team and otherwise
* Share knowledge & experience within the team and broader where appropriate.
* To be technically astute and conversant with the latest advances in technology
Qualifications & Relevant Experience
Essential:
* Degree, HND HNC in Instrumentation and Control or equivalent professional qualification (Incorporated, Chartership etc).
* SUEPEE & Intrinsic Safety Training
* Gained good experience of Control and instrumentation engineering
* Possess a full UK driving licence.
Desirable:
* Relevant training in relevant control systems & HMIs (e.g. Rockwell, DeltaV, Wonderware, Siemens)
* Have previous site works experience
* Be highly organised with attention to detail
* Be results focused and have the ability to meet commitments & deadlines
Job Specification – Scope of Work Requirements
Responsibilities
1. Design
You will:
* Be responsible for the development of designs and schematics with third party suppliers
* Ensure that all C&I design changes are captured by the change control process.
* Provide technical input during design phase and site works
* Work with specifications and material requisitions for control systems, instruments, and other components
* Work with and review material requisitions to vendors for enquiry, order placement and for any subsequent revisions
* Participate in design reviews
* Perform calculations e.g. for intrinsic safety, etc.
* Assist in the development of project functional requirements specifications for control systems and instrumentation
2. Survey
You will:
* Carry out feasibility studies and review design alternatives including undertaking site surveys
* Provide relevant knowledgeable practical skills in the response and actions for:
* Site visits and site surveys
* Site queries and discussions
* Supplier, vendor, contractor, client and site related discussions
* Site based activities
* Prepare, check, approve and provide technical input into project deliverables to the required quality standards in conformance with or better than, the approved budget and programme
3. Installation
You will:
* Install and commission instrument control systems
* Liaise with other disciplines in the execution of the work.
* Observe and operate both the busioness and customer safe systems of work, complying with all legislation.
* Ensure that the applicable legislation and standards are applied across all aspects of C&I delivery to the Project
* Attend site during construction and commissioning phase when required
4. Commissioning
You will:
* Actively participate in installation / configuration / implementation and commissioning of equipment from suppliers
* Liaise effectively with the Engineering Manager to solve any problems which arise
5. Technical Support/Document Control
You will:
* Provide C&I Engineering technical support
* Take ownership of C&I technical queries (TQs) to ensure satisfactory resolution.
* Be responsible for diagnosis and rectification / management of issues in complex application software.
* Implement smaller system upgrades or modifications that have the potential to significantly impact the customer’s process. Implement system changes to live plant without compromising process safety and operation.
* Provide C&I technical services to existing clients as instructed
* Interface with clients' engineering representatives
* Establish and maintain a repository for project documents
* Deliver documentation that is technically correct to the required standard and schedule
6. Project Delivery/General
You will:
* Understand project life cycle from requirements to delivery and develop project documentation.
* Ensure timely communication to provide effective turn around on customer feedback and billings.
* Work on specific schemes of work as instructed by the Engineering Manager
* Meet the requirements of the agreed schedule identified within the project plan for the C&I deliverable's as assigned by the Engineering Manager
* Liaise with and manage interfaces with other engineering disciplines; process, electrical, mechanical, piping etc.
* Advise the Engineering Manager of any major slippages and their causes, major technical problems and unresolved differences with other Groups, and requests for changes by the Client which may constitute a contract change
* Participate in engineering reviews.
* Engage with any other activities that would be realistically required of the role.
* Represent the business in all customer interactions in a manner that is consistent with values.
* Liaise with other Groups and Clients as necessary.
If you believe you have the experience required, please apply with your CV now for instant consideration!
TO APPLY - PLEASE APPLY WITH AN UP-TO-DATE CV
Candidates will ideally show evidence of the above in their CV in order to be considered.
Please be advised if you haven't heard from us within 48 hours then unfortunately your application has not been successful on this occasion, we may however keep your details on file for any suitable future vacancies and contact you accordingly.
*Pontoon is an employment consultancy. We put expertise, energy, and enthusiasm into improving everyone’s chance of being part of the workplace. We respect and appreciate people of all ethnicities, generations, religious beliefs, sexual orientations, gender identities, and more. We do this by showcasing their talents, skills, and unique experience in an inclusive environment that helps them thrive.