Summary
As an mechanical maintenance apprentice at William Lee, the candidate's duties and responsibilities will vary based on the company’s requirements with structure. The candidate will build their knowledge in a busy foundry environment, and this is therefore the basis of them becoming the next generation of engineer.
Annual wage
£14,918.80 a year
Training course
Mechatronics Maintenance Technician (level 3)
Hours
You will work Monday to Friday. Your start and finish times including your shift pattern will be determined by the employing company.
38 hours a week
Possible start date
Monday 8 September
Duration
4 years
Positions available
1
Work
As an apprentice, you’ll work at a company and get hands-on experience. You’ll gain new skills and work alongside experienced staff.
What you’ll do at work
Role & responsibilities:
* Ensure that all work is completed to a high standard, whilst complying with the Company’s Health and Safety requirements to ensure the safety of yourself and others
* To conduct risk assessments on all jobs in the form of 'Take Two’
* Communicate effectively with peers and management
* To work as part of the Maintenance Team ensuring all equipment is operating efficiently and safely
* Become fluent in the Company TPM maintenance system (Total Productive Maintenance) to ensure efficient running of plant assets
* Ensure that the working area is clean and tidy on completion of any job/task
* To install and maintain new and existing equipment, whilst ensuring production is not interrupted
* To put forward and communicate ideas and get involved with plant improvement
Health, Safety & Environment
* Ensure compliance with the company’s health and safety and environmental policies, ensuring these are understood and upheld
* Ensure that you are always equipped with the correct personal protective equipment and is properly looked after and maintained
* Ensure that all accidents are reported and recorded in the accident book
* Ensure any spillages are cleared up immediately and the correct emergency equipment is always available
Where you’ll work
Callywhite Lane
Dronfield
Derbyshire
S18 2XU
Training
An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.
College or training organisation
THE UNIVERSITY OF SHEFFIELD
Your training course
Mechatronics Maintenance Technician (level 3)
Equal to A level
Course contents
* Use information technology, for example to create documentation, communication and information management.
* Obtain, read and interpret task related documentation, such as work instructions, quality control documents, drawings, operation manuals, specifications and service manuals.
* Record information for example job sheets, risk assessments, equipment service records, test results, handover documents and manufacturers' documentation, asset management records, work sheets, checklists, waste environmental records and any legal reporting requirements.
* Conduct initial assessment of equipment that requires maintenance.
* Formulate plans setting out the methodology of the maintenance activity including timescales and resources.
* Select, prepare and use material, consumables, tools and equipment.
* Comply with health and safety regulations and organisational requirements applicable in the workplace. For example, COSHH, PUWER, LOLER, PPE and applying safe systems of work.
* Apply dynamic risk assessment, hazard identification and risk mitigation principles and techniques.
* Apply isolation principles and techniques to equipment undergoing maintenance, including dissipation of stored energies as required.
* Manufacture, repair and refurbish components using hand and machine tools.
* Restore the workplace on completion of the maintenance activity. Handover resources, consumables and equipment to process owner.
* Apply the techniques and processes used in reactive maintenance and repair activities on complex engineered systems such as electrical, electronic, mechanical, fluid power and control systems.
* Produce, maintain, update, record and store documentation including electronic items such as PLC and robot programmes.
* Apply techniques and processes used in planned and preventative maintenance activities on engineered systems such as electrical, electronic, mechanical, fluid power and control systems.
* Apply functional testing and checking techniques and processes after maintenance interventions, and handover to the operational team.
* Apply techniques and processes used in condition monitoring, non-destructive or sensory testing. Record findings and take necessary actions.
* Apply calculation techniques such as, feeds, speeds, tolerances, electrical calculations using Ohms law, power calculations and cable sizing calculations.
* Select, use and confirm calibration of electrical and mechanical testing and measuring equipment.
* Produce sketches or drawings to support maintenance activities.
* Communicate in writing. Prepare communications, documents and reports on technical matters.
* Segregate, separate and dispose of waste streams and by-products.
* Apply 4S or 5S principles of housekeeping to the work environment.
* Identify opportunities and make recommendations to improve operational performance.
* Apply continuous improvement techniques.
* Communicate with others verbally. Negotiate with colleagues or stakeholders. For example, to access equipment or arrange access to equipment.
* Follow equity, diversity and inclusion procedures.
* Carry out and record planned and unplanned learning and development activities.
* Apply fault finding techniques used in reactive maintenance on complex integrated systems including half split, input output, six point technique, function or performance testing, unit or component substitution and equipment diagnostics.
* Use information technology, for example to create documentation, communication and information management.
* Obtain, read and interpret task related documentation, such as work instructions, quality control documents, drawings, operation manuals, specifications and service manuals.
* Record information for example job sheets, risk assessments, equipment service records, test results, handover documents and manufacturers' documentation, asset management records, work sheets, checklists, waste environmental records and any legal reporting requirements.
* Conduct initial assessment of equipment that requires maintenance.
* Formulate plans setting out the methodology of the maintenance activity including timescales and resources.
* Select, prepare and use material, consumables, tools and equipment.
* Comply with health and safety regulations and organisational requirements applicable in the workplace. For example, COSHH, PUWER, LOLER, PPE and applying safe systems of work.
* Apply dynamic risk assessment, hazard identification and risk mitigation principles and techniques.
* Apply isolation principles and techniques to equipment undergoing maintenance, including dissipation of stored energies as required.
* Manufacture, repair and refurbish components using hand and machine tools.
* Restore the workplace on completion of the maintenance activity. Handover resources, consumables and equipment to process owner.
* Apply the techniques and processes used in reactive maintenance and repair activities on complex engineered systems such as electrical, electronic, mechanical, fluid power and control systems.
* Produce, maintain, update, record and store documentation including electronic items such as PLC and robot programmes.
* Apply techniques and processes used in planned and preventative maintenance activities on engineered systems such as electrical, electronic, mechanical, fluid power and control systems.
* Apply functional testing and checking techniques and processes after maintenance interventions, and handover to the operational team.
* Apply techniques and processes used in condition monitoring, non-destructive or sensory testing. Record findings and take necessary actions.
* Apply calculation techniques such as, feeds, speeds, tolerances, electrical calculations using Ohms law, power calculations and cable sizing calculations.
* Select, use and confirm calibration of electrical and mechanical testing and measuring equipment.
* Produce sketches or drawings to support maintenance activities.
* Communicate in writing. Prepare communications, documents and reports on technical matters.
* Segregate, separate and dispose of waste streams and by-products.
* Apply 4S or 5S principles of housekeeping to the work environment.
* Identify opportunities and make recommendations to improve operational performance.
* Apply continuous improvement techniques.
* Communicate with others verbally. Negotiate with colleagues or stakeholders. For example, to access equipment or arrange access to equipment.
* Follow equity, diversity and inclusion procedures.
* Carry out and record planned and unplanned learning and development activities.
* Apply fault finding techniques used in reactive maintenance on complex integrated systems including half split, input output, six point technique, function or performance testing, unit or component substitution and equipment diagnostics.
Your training plan
You will study on a Level 3 Machining technician apprenticeship. On completion of this, you will gain a qualification in Engineering at Level 3 standard.
During the first year of the apprenticeship, your learning will take place at the University of Sheffield’s AMRC Training Centre based at Catcliffe, Rotherham, for an initial block of study on a full-time basis. After this, you will attend the Training Centre for one day a week for knowledge study.
Requirements
Essential qualifications
GCSE in:
* English Language (grade 4)
* Mathematics (grade 4)
Let the company know about other relevant qualifications and industry experience you have. They can adjust the apprenticeship to reflect what you already know.
Skills
* Communication skills
* Attention to detail
* Organisation skills
* Problem solving skills
* Analytical skills