Summary
Tronox are looking for Process Apprentices to be based at their Stallingborough site. Successful applicants will receive practical and theoretical training in chemical processing which will fully equip them for a career in Chemical Manufacturing.
Annual wage
£14,722.50 a year
Wage reflects National Apprenticeship Minimum Wage as of April 1st 2025.
Training course
Process industry manufacturing technician (level 3)
Hours
Monday-Friday 8am-4pm (30mins unpaid lunch) Initially based at Catch then onsite on a day pattern with a shift placement. You are required to work both the day/night shift with experienced operators to gain hands on learning. Shifts to be confirmed.
37 hours 30 minutes a week
Possible start date
Sunday 8 June
Duration
3 years
Positions available
2
Work
As an apprentice, you’ll work at a company and get hands-on experience. You’ll gain new skills and work alongside experienced staff.
What you’ll do at work
The business is looking for an Apprentice to train alongside our existing experienced team of Process Operators on all aspects of operational and process duties. As an apprentice you will study a range of programmes working towards a Level 3 Process Industry Manufacturing Technician Apprenticeship standard, covering a variety of skills and qualifications while earning a wage and completing invaluable practical skills in industry and you can expect to cover the following duties:
Main Duties and responsibilities.
1. Start-up & shutdown the plant process as per operating procedures.
2. Operating the plant and process within the set production and safety & quality parameters.
3. Take samples as per the sampling schedule and procedure.
4. Complete daily logs and make notes of operational events and communicate to the Shift Team Leader and oncoming shift team.
5. Assist in the commissioning of new plant and equipment.
6. Carry out permit to work isolations, de-isolations.
7. Report any Health & Safety issues / incidents.
8. Report any Engineering issues.
9. Ensure good housekeeping standards are maintained on plant.
Other responsibilities;
1. Ensure correct stock control of any raw materials used on plant.
2. Ensure control of emergency equipment and PPE in the area.
3. Ensure correct control of any waste streams and assist in the management of the controlled waste zone.
Initially based at The Catch facility (Stallingborough) then on site based at Laporte Road, Stallingborough, Grimsby, DN40 2PR following a shift pattern – where apprentices are required to work both the day and night shift with experienced process operators to gain hands on learning.
*New applicants who meet the entry requirements of the role will be contacted by the Apprentice Employment Agency team to discuss your application and the apprenticeship in further detail. Please ensure you provide up to date contact details and check your junk in case of redirected emails. Failure to respond to communications will result in your application being withdrawn.
Where you’ll work
Laporte Road
Stallingborough
Grimsby
DN40 2PR
Training
An apprenticeship includes regular training with a college or other training organisation. At least 20% of your working hours will be spent training or studying.
College or training organisation
HCF CATCH LIMITED
Your training course
Process industry manufacturing technician (level 3)
Equal to A level
Course contents
* Review instructions or information to understand the task.
* Plan tasks. Identify and organise resources with consideration for safety, environmental impact, quality, and cost.
* Identify hazards and risks in the workplace and personal safety and mitigation measures.
* Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance.
* Follow environment emergency procedures. For example, make area safe, evacuate.
* Apply sustainability principles for example, minimising waste.
* Apply standard operating procedures (SOPs).
* Check equipment.
* Select, check, and prepare raw materials for process for example, weighing, measuring, control and blending, conditioning, dissolving, and sanitisation.
* Set and adjust processing parameters such as temperature, pressure, speed or time, distance.
* Monitor process for example, take readings and conduct walk-arounds.
* Conduct the control of product streams to maintain specifics.
* Apply quality assurance procedures. For example, density checks, contaminant check, and take samples for laboratory testing.
* Apply intermediate or post-manufacturing procedure for example, labelling, packing, storage, visual inspection, discharge.
* Manage waste streams.
* Clean equipment for example, boil-outs, steam-outs, bake-outs, steam in place SIP, clean in place (CIP).
* Conduct calculations for example, conversations, tare weight, charge weights, yield calculations.
* Store tools and equipment.
* Identify equipment for handover.
* Apply signage and access restriction measures.
* Shut down the process and equipment.
* Isolate process and systems.
* Complete isolation checks.
* Empty equipment for example, drain, purge, vent, and de-pressure.
* Purge, fill, pressurise and leak test.
* Complete post maintenance equipment checks.
* Line-up equipment.
* Connect service connections such as water, electrical, pneumatic, hydraulic for chemical or petrochemical processing.
* De-isolate process, mechanical and electrical systems.
* Complete pre-start up checks.
* Start-up plant and equipment.
* Re-start process.
* Record or enter information - paper based or electronic.
* Interpret data for example, process data, quality control and test procedure data.
* Interpret drawings and graphs.
* Identify issues for example, defects, deviations, process variance, and maintenance requirements.
* Escalate issues outside limits of responsibility.
* Apply problem solving and fault-finding techniques.
* Apply continuous improvement techniques. Make a suggestion for improvement.
* Use information and digital technology for example, management information systems, human machine interfaces, word processing, spreadsheet, email, virtual learning platforms, document sharing platforms. Comply with cyber security requirements.
* Produce written documents for example, handover notes or emails, non-conformances, design change requests.
* Communicate with others verbally for example, colleagues and stakeholders.
* Apply team working principles.
* Plan how to meet personal development needs. Carry out and record planned and unplanned learning and development (CPD) activities.
* Review instructions or information to understand the task.
* Plan tasks. Identify and organise resources with consideration for safety, environmental impact, quality, and cost.
* Identify hazards and risks in the workplace and personal safety and mitigation measures.
* Apply health, safety, and environmental procedures in compliance with regulations, standards, and guidance.
* Follow environment emergency procedures. For example, make area safe, evacuate.
* Apply sustainability principles for example, minimising waste.
* Apply standard operating procedures (SOPs).
* Check equipment.
* Select, check, and prepare raw materials for process for example, weighing, measuring, control and blending, conditioning, dissolving, and sanitisation.
* Set and adjust processing parameters such as temperature, pressure, speed or time, distance.
* Monitor process for example, take readings and conduct walk-arounds.
* Conduct the control of product streams to maintain specifics.
* Apply quality assurance procedures. For example, density checks, contaminant check, and take samples for laboratory testing.
* Apply intermediate or post-manufacturing procedure for example, labelling, packing, storage, visual inspection, discharge.
* Manage waste streams.
* Clean equipment for example, boil-outs, steam-outs, bake-outs, steam in place SIP, clean in place (CIP).
* Conduct calculations for example, conversations, tare weight, charge weights, yield calculations.
* Store tools and equipment.
* Identify equipment for handover.
* Apply signage and access restriction measures.
* Shut down the process and equipment.
* Isolate process and systems.
* Complete isolation checks.
* Empty equipment for example, drain, purge, vent, and de-pressure.
* Purge, fill, pressurise and leak test.
* Complete post maintenance equipment checks.
* Line-up equipment.
* Connect service connections such as water, electrical, pneumatic, hydraulic for chemical or petrochemical processing.
* De-isolate process, mechanical and electrical systems.
* Complete pre-start up checks.
* Start-up plant and equipment.
* Re-start process.
* Record or enter information - paper based or electronic.
* Interpret data for example, process data, quality control and test procedure data.
* Interpret drawings and graphs.
* Identify issues for example, defects, deviations, process variance, and maintenance requirements.
* Escalate issues outside limits of responsibility.
* Apply problem solving and fault-finding techniques.
* Apply continuous improvement techniques. Make a suggestion for improvement.
* Use information and digital technology for example, management information systems, human machine interfaces, word processing, spreadsheet, email, virtual learning platforms, document sharing platforms. Comply with cyber security requirements.
* Produce written documents for example, handover notes or emails, non-conformances, design change requests.
* Communicate with others verbally for example, colleagues and stakeholders.
* Apply team working principles.
* Plan how to meet personal development needs. Carry out and record planned and unplanned learning and development (CPD) activities.
Your training plan
During this three-year programme, you will undertake off the job training at The Catch for the first year. Further training will be provided by experienced Operator team members / you will receive specific on the job training by a mentor on your designated shift for the remaining duration.
You will also be supported by a dedicated assessor who will guide and mentor you throughout your apprenticeship. You will undertake The Level 3 Science Manufacturing Technician Apprenticeship, and you will be required to undertake an end-point assessment. Successful achievement of the end-point assessment will lead to final certification of the apprenticeship.
Requirements
Essential qualifications
GCSE in:
* 5 Subjects including English, Maths & a science (grade 4/C or above)
Let the company know about other relevant qualifications and industry experience you have. They can adjust the apprenticeship to reflect what you already know.
Skills
* Communication skills
* IT skills
* Attention to detail
* Organisation skills
* Customer care skills
* Problem solving skills
* Presentation skills
* Administrative skills
* Number skills
* Analytical skills
* Logical
* Team working
* Creative
* Initiative
* Non judgemental
* Patience
Other requirements
Apprentice Employment Agency is acting as a Flexi-Job Apprentice Agency & will engage you for the duration of the apprenticeship & pay your salary. You should be aware that the company/business named in this vacancy is a host employer & you will not be employed by them. Your application may be shared with training providers & employers.