VGC Group Lowestoft are delighted to be recruiting for a Plant Vehicle Marshal (PVM) for a Nuclear New Build in Leiston, Suffolk. Job Description: Always position yourself in a place of safety outside the direct line of travel and swing radius of slewing plant and remain visible to the operator or driver at all times. Be easily identified by means of unique PPE in line with the PPE. Brief the vehicle driver on the relevant controls and methods of communication Driver Site Rules, the Driver Flash Card for Highways Lane Closures or the PVPMP for the project. Brief the plant operators the relevant PVM controls, People, Vehicle and Plant Interface Zone for the specific item of plant and method of communication relevant to the movement they are about to undertake. Stipulate in all cases that the plant operator/vehicle driver MUST stop if eye contact is lost. Assist plant operators and vehicle drivers to safely maneuver and reverse to prevent injury to people, damage to property or materials, and to stop operations if necessary. Prevent people from putting themselves at risk whilst plant or vehicles are being maneuvered or reversed on site. Check that mirrors, CCTV, flashing beacons and reversing sounders are in place (where fitted), turned on and fully operational prior to reversing operations being undertaken. All defects must be immediately reported to their Supervisor who will agree on the Safe System of Work or rejection of the load. PVM's are not authorised to direct traffic on a public highway. Fitness for the role should be assessed in line with the requirements of Occupational Health Surveillance/Assessments. Personal communications or other media devices of any kind must not be used when marshalling plant or vehicles. Qualifications and Training CPCS Plant and Vehicle Marshal, or NPORS (CSCS)/NPORS Plant and Vehicle Marshal, If you are interested in this opportunity, please apply with your most up to date CV and a member of the team will be in touch. INDEN