Major Recruitment are currently looking for Steel Operative / Overhead Crane Operator in the Dudley area.
Rotating shift patterns:
12.58 6am till 2pm and 2pm till 10pm
13.58ph 10pm till 6am
Overtime:
First 2 hours overtime on weekdays = 15.48ph
Anything from 2 hours to 4 hours overtime on weekdays = 17.37ph
First 4 hours on a Saturday 17.37ph
Anything over 4 hours on a Saturday 23.16ph
Duties and Responsibilities:
* This is the start of the manufacturing process.
* Using an overhead crane to load steel coils onto a mandrel and feed it into the rolling mill - Crane certification required; in-house course will be undertaken.
* When the coil comes to an end, load another onto the mandrel and spot weld them together; this process continues throughout.
* Recording of coils that are loaded and consumed throughout the shop floor computer system.
* Operate Uncoiler, Flattener, Shear Welder, and Accumulator.
* Load steel coil into uncoiler, shear/weld new coil to previous one, and keep line moving.
* Alert to quality issues.
* Use of a micrometer and vernier to check the size, thickness, and quality of the product.
* Check the length corresponds with the job card and record and book finished products on the shop floor computer system.
* Banding machine to then band the tube at the end of the process.
* Read and correctly use a measuring tape, micrometer, and caliper.
Skills and Experience Required:
* 1-2 years industrial manufacturing experience.
* Welding experience.
* Mechanically inclined.
* Effective communication: reading, speaking, writing English.
* Physically able to stand and walk for long periods of time, perform repetitive lifting of 30lbs-50lbs, overhead reaching, bending, kneeling, crouching, pushing, pulling.
INDLS
#J-18808-Ljbffr